Ideas of Distressed Wood Tray

Aug 14th

Are you tired of bent over removing clothes from your front load washing machine? Building a distressed wood tray stands to suit your washing machine as an alternative to pedestals that do not fit the budget. Building oneself means you can make them as long as you need. The main factor to consider when building a tray stand is the weight of the tile. Use solid wood for frame and slightly smooth for the top. Plastic laminate works well for a surface on the tile can sit on without chipping into it because it would be plywood.

Wood Tray White


24 Photos Gallery of: Ideas of Distressed Wood Tray

Image of: Wood Tray White
Image of: Wood Tray Traditional
Image of: Wood Tray Stripe
Image of: Wood Tray Plan
Image of: Wood Tray Oak
Image of: Wood Tray Kit
Image of: Wood Tray Interest
Image of: Wood Tray DIY
Image of: Wood Tray Dark
Image of: Wood Tray Black
Image of: Wood Tray Amazing
Image of: Storey Distressed Tray
Image of: Small Wood Tray
Image of: Easy Distressed Wood Tray
Image of: Distressed Wood Tray Thin
Image of: Distressed Tray Unique
Image of: Distressed Tray Simple
Image of: Distressed Tray Review
Image of: Distressed Tray Original
Image of: Distressed Tray Nice
Image of: Distressed Tray Green
Image of: Distressed Tray Classic
Image of: Distressed Tray Brown
Image of: Beautiful Wood Tray Picture

Stand wood tray four of the 15-inch pieces (leg pieces) on their 1 1/2 inch edge and glue the edge. Secure the other four leg pieces to those with 3-inch or screws to form an “L” with two pieces. Clean up excessive glue immediately with a damp cloth. Glue to the ends of the 16 1/2 inch pieces and fasten them between 19 1/2 inch pieces with 3-inch or screws. The result is a 19 1/2 inch square. Put some glue on the inside of the legs at the top and bottom. Secure the boxes at the top and bottom of the legs with 2 1/2 inch or screws. Clean up excessive glue as before.

Related :   Blue Wingback Chair

Spread glue on the outside of the legs on one side of the wood tray frame. Secure one of the 22 1/2 inch plywood to the box with 1 1/2 inch or screws. Repeat this for the opposite side of the box. Clean up excess glue. Turn the box so that the installed pieces on the left and right. Apply glue to the edges of plywood and legs. Secure one of the 24-by-15-inch pieces of plywood with the legs with a 1/2 inch or screws. Repeat this for the other side. Clean up the glue as before.

Stand the box upright. Apply glue to all surfaces and secure 24-by-24-inch pieces on top of the box with 1 1/2 inch or screws.  Clean up the glue. Wide strips on the entire area on top as well as the underside of plastic laminate with brush. Allows it to dry again to close the pores in each. Apply another layer of adhesive to each piece. Allow it to dry until it is tacky when touched. Adjust the edges of the stand and laminate and bond the laminate to the stand. Run your hand all over the surface to ensure good cohesion. Hold a wood file at a 45 degree angle to the edges of the laminate. Move the file in a downward direction to remove the sharp edge from the laminate.

Related :   Discover the Best Walnut Butcher Block Countertops

Tips and warnings

Paint the box to match your washing machine. Cut the work piece to a different length if desired. Do not leave power tools within reach of children. Do not apply paint to the tray without proper ventilation.